Chevrolet Monte Carlo 2000 - 2005 Dash Trim Kit
Item id: CVL-14C
Full Kit, With Traction ControlRelated products
Chevrolet Monte Carlo 2000-2005 Exterior Door Pillars
Materials
Available in many colors, if there is something that you don’t see it doesn’t mean that we don’t have it, contact us and we will surely fulfill any of your requests
Wood
Modern
Real Carbon Fibers+ $20
Free samples
If you are not sure which one to go with, you can order up to 4 FREE samples. Wait for it in the mail, and then you would definitely have the best decision of what to choose.
We usually ship samples within 1-2 business days
Features
3M Acrylic
Foam Tape
UV Protected
Coating
Precisely Laser-cut
in the USA
Precisely Laser-cut
in the USA
Authentic BDTrims™
product with 5 Year
warranty
Shipping, Returns and Warranty
We usually do not stock dash trim kits, motorcycle dash kits, that we need to produce. All these products require about 1-2 business days to be ready for shipping.
Shipping
We ship by USPS Priority Mail in continental USA and Internationally.
2-4 days delivery in the ISA
If you have delivery problems, contact us and we will definitely fix it.
Customs fees and duties you may pay are not in our jurisdiction, please contact your local customs & duties office to find out how much you may need to pay.
Returns
You have 30 days to return or exchange our products. No restocking fees! Custom made products (those that you request to customize) are not refundable.
5 year warranty
As long as you keep your car we stand by the quality of our products. If you need to replace or fix something please contact us. We will definitely work with you.
Installation
Thoroughly clean the area where the pieces are to be applied with a clean, lint-free cloth and the alcohol swabs provided or with 3M Solvent 70*, to remove ALL residue and dirt.
A test can be performed for cleanliness with ordinary masking tape, if the tape sticks easily to the surface, if not repeat the cleaning process.
Without removing the red backing tape, ’dry-fit’ ALL pieces, noting correct placement, joins and angles.
ALL pieces should be checked «dry-fit» before proceeding to Step 3. Immediately stop installation procedure and contact us even if one piece doesn’t fit.
Any money back or refund requests based on fitting issues will be declined once the kit or partial pieces are installed. Only replacement and correction requests will be reviewed and accepted.
Gently heat the parts with a hairdryer or heat gun set to low. Keep the heat source at least 5″ away from the piece. Pieces will become flexible with application of heat.
Placing the pieces (backing tape side down) on the top of the dash with the front window defrost set to medium for 15 minutes, warms & keeps all pieces ready for installation.
Alternately, on sunny days, laying the kit in the sun for 10-15 mins will have the same effect.
Hold the pieces by the edges to avoid touching the adhesive surface. Peel Red Protective tape out, place piece in position, align correctly and thoroughly press down on the entire surface of each piece to ensure a complete ’wet-out’ of adhesion to the surface. Repeat this step for all pieces you have. When red backing tape removed DO NOT TOUCH 3M adhesive surface!
Remove front side clear or white protective tape from all pieces.
Enjoy our product.